Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 4.99.41 (INSTALL_LARGE) #8: Mon Dec 10 15:19:45 GMT 2007
	mjf@nbsd.console-pimps.org:/home/mjf/obj/NetBSD/HEAD/i386/obj/sys/arch/i386/compile/INSTALL_LARGE
total memory = 503 MB
avail memory = 483 MB
timecounter: Timecounters tick every 10.000 msec
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
BIOS32 rev. 0 found at 0xf0010
SMBIOS rev. 2.5 @ 0xf06c0 (37 entries)
ASUSTeK Computer INC. 701 (x.x)
mainbus0 (root)
cpu0 at mainbus0 apid 0: (boot processor)
cpu0: Intel Pentium M (Dothan) (686-class), 630.10 MHz, id 0x6d6
cpu0: features afe9fbbf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,APIC,SEP,MTRR>
cpu0: features afe9fbbf<PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX>
cpu0: features afe9fbbf<FXSR,SSE,SSE2,SS,TM,SBF>
cpu0: "Intel(R) Celeron(R) M processor          900MHz"
cpu0: I-cache 32 KB 64B/line 8-way, D-cache 32 KB 64B/line 8-way
cpu0: ITLB 128 4 KB entries 4-way, 2 4 MB entries fully associative
cpu0: DTLB 128 4 KB entries 4-way, 8 4 MB entries 4-way
cpu0: using thermal monitor 1
cpu0: calibrating local timer
cpu0: apic clock running at 70 MHz
timecounter: Timecounter "lapic" frequency 70007225 Hz quality 2100
ioapic0 at mainbus0 apid 1: pa 0xfec00000, version 20, 24 pins
acpi0 at mainbus0: Advanced Configuration and Power Interface
acpi0: using Intel ACPI CA subsystem version 20070320
acpi0: SCI interrupting at int 9
acpi0: fixed-feature power button present
timecounter: Timecounter "ACPI-Safe" frequency 3579545 Hz quality 900
ACPI-Safe 24-bit timer
CPU1 (ACPI Object Type 'Processor' [0x0c]) at acpi0 not configured
PCI0 (PNP0A08) [PCI Express/PCI-X Mode-2 Host Bridge] at acpi0 not configured
MCH (PNP0C01) [System Board] at acpi0 not configured
PIC (PNP0000) [AT Interrupt Controller] at acpi0 not configured
DMAD (PNP0200) [AT DMA Controller] at acpi0 not configured
TMR (PNP0100) [AT Timer] at acpi0 not configured
RTC0 (PNP0B00) [AT Real-Time Clock] at acpi0 not configured
PS2K (PNP0303) [IBM Enhanced (101/102-key, PS/2 mouse support)] at acpi0 not configured
PS2M (SYN0A00) at acpi0 not configured
SPKR (PNP0800) [AT-style speaker sound] at acpi0 not configured
COPR (PNP0C04) [Math Coprocessor] at acpi0 not configured
EC0 (PNP0C09) [ACPI Embedded Controller] at acpi0 not configured
RMSC (PNP0C02) [Plug and Play motherboard register resources] at acpi0 not configured
OMSC (PNP0C02) [Plug and Play motherboard register resources] at acpi0 not configured
PCIE (PNP0C02) [Plug and Play motherboard register resources] at acpi0 not configured
BAT0 (PNP0C0A) [ACPI Control Method Battery] at acpi0 not configured
AC0 (ACPI0003) [AC Device] at acpi0 not configured
PCIE (PNP0C02) [Plug and Play motherboard register resources] at acpi0 not configured
RMEM (PNP0C01) [System Board] at acpi0 not configured
ATKD (ASUS010) at acpi0 not configured
LID (PNP0C0D) [ACPI lid device] at acpi0 not configured
SLPB (PNP0C0E) [ACPI sleep button device] at acpi0 not configured
PWRB (PNP0C0C) [ACPI power button device] at acpi0 not configured
LNKA (PNP0C0F) [PCI interrupt link device] at acpi0 not configured
LNKB (PNP0C0F) [PCI interrupt link device] at acpi0 not configured
LNKC (PNP0C0F) [PCI interrupt link device] at acpi0 not configured
LNKD (PNP0C0F) [PCI interrupt link device] at acpi0 not configured
LNKH (PNP0C0F) [PCI interrupt link device] at acpi0 not configured
TZ00 (ACPI Object Type 'Thermal' [0x0d]) at acpi0 not configured
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: vendor 0x8086 product 0x2590 (rev. 0x04)
pchb0: returns constant 0xff stream, RNG disabled.
agp at pchb0 not configured
vga1 at pci0 dev 2 function 0: vendor 0x8086 product 0x2592 (rev. 0x04)
wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation)
wsmux1: connecting to wsdisplay0
direct rendering for vga1 unsupported
vendor 0x8086 product 0x2792 (miscellaneous display, revision 0x04) at pci0 dev 2 function 1 not configured
vendor 0x8086 product 0x2668 (multimedia subclass 0x03, revision 0x04) at pci0 dev 27 function 0 not configured
ppb0 at pci0 dev 28 function 0: vendor 0x8086 product 0x2660 (rev. 0x04)
pci1 at ppb0 bus 4
pci1: no spaces enabled!
ppb1 at pci0 dev 28 function 1: vendor 0x8086 product 0x2662 (rev. 0x04)
pci2 at ppb1 bus 3
pci2: memory space enabled, rd/line, wr/inv ok
lii0 at pci2 dev 0 function 0: Attansic/Atheros L2 Fast Ethernet
atl2_reset
lii0: Ethernet address 00:1e:8c:27:7e:55
lii0: interrupting at ioapic0 pin 17 (irq 11)
ukphy0 at lii0 phy 1: Generic IEEE 802.3u media interface
ukphy0: OUI 0x00c82e, model 0x0002, rev. 2
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
ppb2 at pci0 dev 28 function 2: vendor 0x8086 product 0x2664 (rev. 0x04)
pci3 at ppb2 bus 1
pci3: memory space enabled, rd/line, wr/inv ok
ath0 at pci3 dev 0 function 0
ath0: interrupting at ioapic0 pin 18 (irq 10)
ath0: unable to attach hardware; HAL status 13
uhci0 at pci0 dev 29 function 0: vendor 0x8086 product 0x2658 (rev. 0x04)
uhci0: interrupting at ioapic0 pin 23 (irq 3)
usb0 at uhci0: USB revision 1.0
usbd_get_string: getting lang failed, using 0
uhub0 at usb0
uhub0: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 29 function 1: vendor 0x8086 product 0x2659 (rev. 0x04)
uhci1: interrupting at ioapic0 pin 19 (irq 7)
usb1 at uhci1: USB revision 1.0
usbd_get_string: getting lang failed, using 0
uhub1 at usb1
uhub1: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2 at pci0 dev 29 function 2: vendor 0x8086 product 0x265a (rev. 0x04)
uhci2: interrupting at ioapic0 pin 18 (irq 10)
usb2 at uhci2: USB revision 1.0
usbd_get_string: getting lang failed, using 0
uhub2 at usb2
uhub2: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3 at pci0 dev 29 function 3: vendor 0x8086 product 0x265b (rev. 0x04)
uhci3: interrupting at ioapic0 pin 16 (irq 5)
usb3 at uhci3: USB revision 1.0
usbd_get_string: getting lang failed, using 0
uhub3 at usb3
uhub3: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
ehci0 at pci0 dev 29 function 7: vendor 0x8086 product 0x265c (rev. 0x04)
ehci0: interrupting at ioapic0 pin 23 (irq 3)
ehci0: BIOS has given up ownership
ehci0: EHCI version 1.0
ehci0: companion controllers, 2 ports each: uhci0 uhci1 uhci2 uhci3
usb4 at ehci0: USB revision 2.0
usbd_get_string: getting lang failed, using 0
uhub4 at usb4
uhub4: vendor 0x8086 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub4: 8 ports with 8 removable, self powered
ppb3 at pci0 dev 30 function 0: vendor 0x8086 product 0x2448 (rev. 0xd4)
pci4 at ppb3 bus 5
pci4: no spaces enabled!
pcib0 at pci0 dev 31 function 0
pcib0: vendor 0x8086 product 0x2641 (rev. 0x04)
piixide0 at pci0 dev 31 function 2
piixide0: Intel 82801FBM Serial ATA Controller (ICH6) (rev. 0x04)
piixide0: bus-master DMA support present
piixide0: primary channel wired to compatibility mode
piixide0: primary channel interrupting at ioapic0 pin 14 (irq 14)
atabus0 at piixide0 channel 0
piixide0: secondary channel wired to compatibility mode
piixide0: secondary channel interrupting at ioapic0 pin 15 (irq 15)
atabus1 at piixide0 channel 1
vendor 0x8086 product 0x266a (SMBus serial bus, revision 0x04) at pci0 dev 31 function 3 not configured
isa0 at pcib0
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
npx0 at isa0 port 0xf0-0xff
npx0: reported by CPUID; using exception 16
isapnp0: no ISA Plug 'n Play devices found
timecounter: Timecounter "TSC" frequency 630105950 Hz quality 800
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
Kernelized RAIDframe activated
md0: internal 5000 KB image area
umass0 at uhub4 port 5 configuration 1 interface 0
umass0: ENE UB6225, rev 2.00/1.00, addr 2
umass0: using SCSI over Bulk-Only
scsibus0 at umass0: 2 targets, 1 lun per target
sd0 at scsibus0 target 0 lun 0: <USB2.0, CardReader SD0, 0100> disk removable
sd0: fabricating a geometry
sd0: 7680 MB, 7680 cyl, 64 head, 32 sec, 512 bytes/sect x 15728640 sectors
vendor 0xeb1a product 0x2761, class 239/2, rev 2.00/8.21, addr 3, uhub4 port 8 not configured
wd0 at atabus1 drive 0: <SILICONMOTION SM223AC>
wd0: drive supports 1-sector PIO transfers, LBA addressing
wd0: 3815 MB, 7753 cyl, 16 head, 63 sec, 512 bytes/sect x 7815024 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 4 (Ultra/66)
wd0(piixide0:1:0): using PIO mode 4, Ultra-DMA mode 4 (Ultra/66) (using DMA)
sd0: fabricating a geometry
boot device: lii0
root on md0a dumps on md0b
root file system type: ffs
WARNING: clock gained 2 days
WARNING: CHECK AND RESET THE DATE!
warning: no /dev/console
atl2_media_status
atl2_mii_statchg
atl2_media_status
atl2_media_status
atl2_media_status
atl2_media_status
atl2_media_status
atl2_media_status
atl2_media_status
atl2_media_change
atl2_init
atl2_reset
atl2_mii_statchg
atl2_intr (5000800)
atl2_mii_statchg
atl2_intr (5000800)
atl2_mii_statchg
atl2_init
atl2_reset
atl2_mii_statchg
atl2_start
atl2_start: put 0
atl2_intr (5010080)
atl2_txintr
atl2_txintr: ack'd 0
atl2_start
atl2_start
atl2_start: put 1
atl2_intr (5010080)
atl2_txintr
atl2_txintr: ack'd 1
atl2_start
atl2_intr (5000800)
atl2_mii_statchg
atl2_intr (5000800)
atl2_mii_statchg
atl2_start
atl2_start: put 2
atl2_intr (5010080)
atl2_txintr
atl2_txintr: ack'd 2
atl2_start
atl2_intr (5020000)
atl2_rxintr
atl2_rxintr: getting 0 (346) [1]
read 346 bytes
writing: 1
atl2_start
atl2_start: put 3
atl2_intr (5010080)
atl2_txintr
atl2_txintr: ack'd 3
atl2_start
atl2_intr (5020000)
atl2_rxintr
atl2_rxintr: getting 1 (346) [1]
read 692 bytes
writing: 2
atl2_start
atl2_start: put 4
atl2_intr (5010080)
atl2_txintr
atl2_txintr: ack'd 4
atl2_start
atl2_media_status
atl2_media_status
atl2_media_status
atl2_media_status
atl2_start
atl2_start: put 5
atl2_intr (5010080)
atl2_txintr
atl2_txintr: ack'd 5
atl2_start
atl2_start
atl2_start: put 6
atl2_intr (5010080)
atl2_txintr
atl2_txintr: ack'd 6
atl2_start
atl2_start
atl2_start: put 7
atl2_intr (5010080)
atl2_txintr
atl2_txintr: ack'd 7
atl2_start
atl2_intr (5020000)
atl2_rxintr
atl2_rxintr: getting 2 (64) [1]
read 756 bytes
writing: 3
atl2_start
atl2_start: put 8
atl2_intr (5010080)
atl2_txintr
atl2_txintr: ack'd 8
atl2_start
atl2_intr (5020000)
atl2_rxintr
atl2_rxintr: getting 3 (102) [1]
read 858 bytes
writing: 4
atl2_start
atl2_start: put 9
atl2_intr (5010080)
atl2_txintr
atl2_txintr: ack'd 9
atl2_start
atl2_intr (5020000)
atl2_rxintr
atl2_rxintr: getting 4 (102) [1]
read 960 bytes
writing: 5
atl2_intr (5020000)
atl2_rxintr
atl2_rxintr: getting 5 (64) [1]
read 1024 bytes
writing: 6
atl2_start
atl2_start: put 10
atl2_intr (5010080)
atl2_txintr
atl2_txintr: ack'd 10
atl2_start
atl2_intr (5020000)
atl2_rxintr
atl2_rxintr: getting 6 (1070) [1]
read 2094 bytes
writing: 7
atl2_start
atl2_start: put 11
atl2_intr (5010080)
atl2_txintr
atl2_txintr: ack'd 11
atl2_start
atl2_intr (5020000)
atl2_rxintr
atl2_rxintr: getting 7 (1070) [1]
read 3164 bytes
writing: 8
atl2_intr (5020000)
atl2_rxintr
atl2_rxintr: getting 8 (1070) [1]
read 4234 bytes
writing: 9
atl2_intr (5020000)
atl2_rxintr
atl2_rxintr: getting 9 (1070) [1]
read 5304 bytes
writing: 10
atl2_intr (5020000)
atl2_rxintr
atl2_rxintr: getting 10 (64) [1]
read 5368 bytes
writing: 11
atl2_start
atl2_start: put 12
atl2_intr (5010080)
atl2_txintr
atl2_txintr: ack'd 12
atl2_start
atl2_intr (5020000)
atl2_rxintr
atl2_rxintr: getting 11 (1070) [1]
read 6438 bytes
writing: 12
atl2_start
atl2_start: put 13
atl2_intr (5010080)
atl2_txintr
atl2_txintr: ack'd 13
atl2_start
atl2_intr (5020000)
atl2_rxintr
atl2_rxintr: getting 12 (1070) [1]
read 7508 bytes
writing: 13
atl2_start
atl2_start: put 14
atl2_intr (5010080)
atl2_txintr
atl2_txintr: ack'd 14
atl2_start
atl2_intr (5020000)
atl2_rxintr
atl2_rxintr: getting 13 (1070) [1]
read 8578 bytes
writing: 14
atl2_intr (5020000)
atl2_rxintr
atl2_rxintr: getting 14 (1070) [1]
read 9648 bytes
writing: 15
atl2_start
atl2_start: put 15
atl2_intr (5010080)
atl2_txintr
atl2_txintr: ack'd 15
atl2_start
atl2_init
atl2_reset
atl2_mii_statchg
nd6_setmtu0: new link MTU on lii0 (256) is too small for IPv6 which needs 1280
atl2_intr (5020000)
atl2_rxintr
atl2_rxintr: getting 0 (64) [3]
read 9712 bytes
writing: 1
atl2_intr (5020000)
atl2_rxintr
atl2_rxintr: getting 1 (64) [3]
read 9776 bytes
writing: 2
atl2_start
atl2_start: put 0
atl2_intr (5010080)
atl2_txintr
atl2_txintr: ack'd 0
atl2_start
atl2_intr (5020000)
atl2_rxintr
atl2_rxintr: getting 2 (64) [1]
read 9840 bytes
writing: 3
atl2_start
atl2_start: put 1
atl2_intr (5010080)
atl2_txintr
atl2_txintr: ack'd 1
atl2_start
atl2_intr (5020000)
atl2_rxintr
atl2_rxintr: getting 3 (64) [1]
read 9904 bytes
writing: 4
atl2_intr (5020000)
atl2_rxintr
atl2_rxintr: getting 4 (96) [3]
read 10000 bytes
writing: 5
atl2_intr (5020000)
atl2_rxintr
atl2_rxintr: getting 5 (96) [3]
read 10096 bytes
writing: 6
atl2_intr (5020000)
atl2_rxintr
atl2_rxintr: getting 6 (96) [3]
read 10192 bytes
writing: 7